-32%
, ,

Thermaltake Pacific R240 D5 Soft Tube | DIY Cooling

Thermaltake
Availability:

Ka stok


  • Custom DIY Liquid Cooling
  • Thermaltake Pacific R240 D5
  • Soft Tube, 240mm Radiator
  • 2x120mm FANS RED LED
  • Best in Class D5 Liquid pump
  • Requires Good Knowledge for install
  • LV4Tech can install it at customer request with additional fee.

39.900 LEK 59.000 LEK

Ka stok

Bli Menjeher vetem kete produkt

PACKAGE INCLUDES: 

P/N CL-W196-CU00RE-A
DIMENSIONS 434(L) x 308 (W) x 186 (H)
COMPATIBILITY Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
COMPONENTS DIMENSIONS Pump & Reservoir: 94.2 (L) x 87.4 (W) x 228.1 (H) mm
Radiator : 273 (L) x 120.7 (W) x 28.8 (H) mm
TUBE DIMENSIONS OD : 3/4” ( 19 mm ) : ID : 1/2”( 13 mm )
FAN SPECS 1500 RPM (1000RPM with LNC)
COOLANT Coolant is not include
KIT CONTENTS CPU Water Block
– Pacific W1 CPU Water Block x1Pump/Reservoir
– Pacific PR15-D5 Pump/Reservoir Combo x1

Radiator
– Pacific R240 Radiator 28.8 (H) x 120.7 (W) x 273 (L) mm x1

Fittings
– Pacific 1/2” ID x 3/4” OD Compression (Chrome)) x6
– Pacific G1/4 90 Degree Adapter – Chrome x2

Fan
– Riing 12 LED Radiator Fan (LED Red) x2

Tube
– V-tubler 4T 1/2’‘(12.7mm) ID x 3/4’‘(19mm) OD
– Transparent Tube x2 Meters

Accessory
– Intel and AMD Universal Backplated & Mounting Kit
– 24pin ATX Bridge Tool x1
– Thermaltake Thermal Grease x1

 

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

 

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
SKU: CL-W196-CU00RE-A Kategori: , , Etiketa: , , , ,
Peshë 4 g/kg
Brand

Thermaltake

Condition

New

CPU Socket

AMD AM4, AMD AM5, LGA1151

lights

LED Light

Cooling Type

240mm Radiator, DIY Custom LOOP

Warranty

3 Months

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Please select your product
Monedha
ALL Lek Shqipërie
EUR Euro